Power Sensors Calibration: Accuracy for RF & Microwave Systems
Post-repair calibration verifies the instrument is back inside its measurement uncertainty budget.Read article →
Biomedical Test Equipment Repair
Defibrillator analyzers, infusion-pump analyzers, ESU analyzers, patient simulators · 90-day warranty · ISO/IEC 17025 accredited post-repair calibration · ANAB AC-1736
Biomedical Test Equipment Repair
Techmaster Electronics provides factory-trained repair of biomedical test instruments used by hospital clinical engineering teams and medical-device OEMs — Fluke Biomedical, Datrend, Pronk Technologies, BC Group, Rigel Medical, and Riken Keiki test sets. Every repair returns with an ISO/IEC 17025 accredited post-repair calibration certificate so it is immediately ready for Joint Commission audit.
Equipment We Repair
Hospital biomed and medical OEM QA teams depend on test sets that hold accuracy between PMs. Every repair includes a NIST-traceable post-repair calibration with full uncertainty disclosure.
Defibrillator Analyzers
Fluke Impulse 7000DP / 6000D / 4000, Pronk Technologies Rigel UNI-SiM, Datrend Phase 3 / Vital Sign — high-voltage front-end repair, energy-measurement calibration, and ECG simulator board service.
Infusion Pump Analyzers
Fluke IDA-6, Datrend Aria, Rigel Multi-Flo — flow-cell repair, occlusion-pressure transducer replacement, and full multi-channel calibration against NIST-traceable mass-flow standards.
ESU / Electrosurgical Analyzers
Fluke QA-ES III / ESU-2400, BC Group ESU-2050, Datrend Phase 3 ESU — RF measurement chain repair, dummy-load service, and post-repair calibration across the 200–7000 Ω / 0–500 W range.
Patient Simulators
Fluke ProSim 8 / ProSim 4, Datrend Phase 3 / Vital Sign Simulator, Rigel UNI-SiM — ECG / SpO2 / IBP / NIBP simulator board repair, fetal/maternal waveform calibration, and arrhythmia library verification.
Also repaired: NIBP Simulators · Pulse Oximeter Testers (SpO2) · Electrical Safety Analyzers (IEC 62353) · Ventilator Testers · Anesthesia Gas Analyzers · Fetal Simulators · Defibrillator/AED Trainers · Pacemaker Analyzers
Industries We Serve
Mission-critical biomedical test equipment repair across the sectors where instrument downtime is unacceptable.
Hospitals & Clinical Engineering
Joint Commission / CMS-aligned PM programs — fast repair turnaround for hospital biomed teams across 50 states.
Surgical Centers & ASCs
ESU and defibrillator analyzer support for ambulatory surgical centers and outpatient OR facilities.
Medical Device OEM QA
Production-line test sets for defibrillator, infusion pump, ventilator, and patient-monitor manufacturers — FDA QSR-aligned repair records.
Biomed Service ISOs
Independent service organizations supporting hospital biomed contracts — fleet-level repair pricing and turnaround.
Long-Term Care & SNFs
Skilled nursing facility biomed programs — simplified PM/repair documentation for state survey compliance.
Veterinary Hospitals
Veterinary cardiology and surgical-equipment test analyzers — same-day quotes for small-animal and large-animal practices.
Government & VA Healthcare
VA, DoD, and federal hospital biomed contracts — GSA-compatible quoting and audit documentation.
Medical Schools & Research
University clinical engineering programs and translational research labs requiring traceable biomedical test gear.
Three Levels of Biomedical Repair
Every Techmaster repair includes a post-repair calibration sticker on the instrument. Choose the depth of repair and the documentation level that matches your audit and operational needs.
1
Board-Level Repair
Fast turn restore
- Module / board swap diagnosis
- Failed module replacement
- Functional verification
- Traceable post-repair calibration
2
Component-Level Repair
Plus parts & rework
- Schematic-level diagnosis
- SMD / through-hole component-level rework
- As-found / as-left data report
- Z540-compliant post-repair calibration
Most Rigorous
3
OEM-Spec Restoration
Audit-ready accreditation
- Full restore to OEM specifications
- Replacement of out-of-tolerance components
- ISO/IEC 17025 accredited calibration certificate
- Measurement uncertainties report
- ANAB Cert AC-1736 reference
Click here to learn more about post-repair calibration levels →
Our Repair Advantages
Why aerospace, defense, manufacturing, and healthcare customers trust Techmaster for biomedical test equipment repair since 1989.
90-Day Repair Warranty
Every repair is covered by a 90-day parts-and-labor warranty — if the same failure reoccurs, we repair it again at no charge.
ISO/IEC 17025 Cal Included
Every repaired instrument ships back with a post-repair calibration certificate against ANAB Cert AC-1736 — no separate calibration order needed.
Faster Than OEM
Standard 7–10 business-day repair turnaround vs. 4–8 weeks at the OEM service center. Expedite service available. Free local pickup in Silicon Valley, So-Cal, and Orlando.
Got a defibrillator analyzer or patient simulator down before your next PM cycle?
Our technicians handle Fluke Biomedical, Datrend, Pronk Technologies, BC Group, Rigel Medical, and Bio-Tek units — including legacy gear the OEM no longer supports. Loaner units may be available while yours is in repair.
Frequently Asked Questions
Common questions about biomedical test equipment repair at Techmaster Electronics.
What is the typical turnaround for biomedical analyzer repair?
Standard repair turnaround is 7–10 business days from receipt, including post-repair ISO/IEC 17025 calibration verification. Defibrillator analyzers with high-voltage front-end work may take 10–15 business days. Expedited service is available for hospital biomed loaner-pool support.
Will the repaired analyzer still be audit-ready for Joint Commission and CMS surveys?
Yes. Every repaired biomedical analyzer is returned with an ISO/IEC 17025 accredited calibration certificate against ANAB Cert AC-1736, NIST-traceable measurements, and full uncertainty disclosure — the documentation hospital biomed teams use for Joint Commission EC.02.04.03 and CMS audit response.
Do you repair legacy Fluke Biomedical and Bio-Tek analyzers?
Yes — legacy support is one of Techmaster’s specialties. We repair Fluke Biomedical Impulse 4000 / 6000, Bio-Tek QA90 / PS320 / ESU-2300, and Datrend Vital Sign / Phase 3 units, including models the OEM has declared end-of-service.
Do you offer loaner units while ours is in repair?
Yes, in many cases. We maintain a rental fleet of common biomedical analyzers (defibrillator, infusion pump, ESU, patient simulator). Contact sales@techmaster.us with your model number to check availability.
What happens if my analyzer is unrepairable?
We provide a written diagnosis and credit the evaluation fee toward a refurbished or rental replacement from our Sales & Rentals inventory. You only pay the evaluation fee on unrepairable units.
Which Techmaster locations perform biomedical test equipment repair?
Biomedical repair is performed at our Vista CA, Santa Clara CA, Orlando FL, and San Antonio TX laboratories. Free local pickup is available in Silicon Valley, Southern California, and Orlando.
Ready to schedule your biomedical test equipment repair?
Send your model number, serial, and failure symptoms — we’ll respond within one business day with diagnosis pricing, repair turnaround, and a shipping label or pickup window.
Related Articles
Insights from Techmaster’s metrology and repair engineering team.
Calibration
Temperature Control Calibration in Industry
Industrial temperature control — from operating principles to standard calibration procedures.Read article →
