Power Sensors Calibration: Accuracy for RF & Microwave Systems
Buying or renting a power sensor? Here is what an accuracy verification certificate must show for 5G, radar, and satcom work.Read article →
Calibrators Sales & Rentals
Fluke 55XX/5790A/8588A multi-product calibrators, Druck and Mensor pressure calibrators, Fluke JOFRA dry-block, and Beamex multifunction loop calibrators · ISO/IEC 17025 calibrated before shipment · daily / weekly / monthly rentals · ANAB Certificate AC-1736
Calibrators Sales & Rentals
Techmaster Electronics carries the deepest inventory of calibration-grade calibrators in the United States — Fluke 55XX multi-product, 5790A AC measurement standards, 8588A reference DMMs, Druck and Mensor pressure standards, Fluke / JOFRA dry-block and bath calibrators, and Beamex documenting field calibrators. Available to purchase, trade-in, or rent on flexible terms with a current ANAB-accredited cal certificate on every shipment.
Equipment We Sell & Rent
Recommended calibrator bundles for the metrology labs, process plants, and regulated industries where source-and-measure accuracy and audit-ready uncertainty budgets drive product release.
Multi-Product Calibrators
Fluke 5520A / 5522A / 5730A multi-product, 5790A AC measurement standard, 8588A 8.5-digit reference DMM, and Time Electronics 1100 series — the source-and-measure backbone of every metrology lab.
Pressure Calibrators
Druck DPI 612 / 620, Fluke 729 automatic pressure calibrators, Mensor CPC4000 / 6050 deadweight references, Crystal XP2i, and Ralston DCB hand pumps — vacuum through 10 000 psi.
Dry-Block & Bath Calibrators
Fluke 914X / 9170 / 9171 / 9118A field dry-blocks, JOFRA ATC / RTC, and HART Scientific oil-bath standards — -100 °C to +700 °C with milli-kelvin uncertainties.
Multifunction Loop & Signal Calibrators
Fluke 754 / 725, Beamex MC6 / MC2 documenting calibrators, GE-Druck DPI 880, and Meriam MFC series — field-portable mA / V / thermocouple / RTD / pressure simulation in one chassis.
Also available for sale or rent: Decade Resistors · Reference Standards · Signal References · AC/DC Shunts · Voltage Dividers · Hipot Calibrators · Earth-Tester Standards · Loop / Process Calibrators · Thermocouple Simulators · RTD Simulators
Industries We Serve
More from the Techmaster blog on RF / microwave test instruments, acquisition strategy, and lab planning.
Aerospace & Defense
AS9100 / NADCAP cal-lab source-and-measure standards — Fluke 5790A / 8588A for ATP cal, pressure deadweight machines for hydraulic system test.
Pharmaceutical & Biotech
USP / cGMP loop calibrators for jacketed-reactor RTDs, autoclave thermocouple bundles, and HPLC pump pressure validation.
Oil & Gas / Petrochemical
Field-portable Beamex MC6 documenting calibrators, Druck pressure standards, and Hart Scientific reference thermometers for API-MPMS custody-transfer calibration.
Power Generation
Multi-product calibrators for substation relay-test verification, transformer ratio meters, partial-discharge reference sources — NERC-CIP cycle aligned.
Metrology & Cal-Lab Outsource
Reference DMMs, deadweight pressure machines, and dry-block calibrators — the equipment cal labs use to calibrate other cal labs.
Medical Devices
IEC 60601 electrical-safety and defibrillator analyzers, ESU analyzers, and infusion-pump testers for FDA QSR-aligned BMET teams.
Automotive & EV
IATF 16949 production-line bench calibrators — voltage / current / temperature sources for ECU and battery-pack final-test stations.
Chemical & Process Mfg
Mensor pressure standards, Beamex documenting calibrators, and HART Scientific bath references for ISA-95 process-loop verification.
Three Ways to Acquire RF Equipment
More from the Techmaster blog on RF / microwave test instruments, acquisition strategy, and lab planning.
1
Buy New
Authorized OEM partner
- New from Keysight / R&S authorized channels
- Latest firmware and OEM revision
- Full manufacturer warranty (typically 1–3 years)
- ISO/IEC 17025 calibrated before shipment
2
Buy Refurbished
20–50% off new
- Inspected, refurbished, and tested in-house
- 30-day satisfaction guarantee
- 90-day workmanship warranty
- ISO/IEC 17025 cal cert at shipment
Most Flexible
3
Rent
Daily / Weekly / Monthly
- Same-week dispatch on common models
- Free outbound shipping (CONUS)
- ISO/IEC 17025 cal cert at handoff
- Apply rental fees toward purchase (rent-to-own)
Our Sales & Rental Advantages
More from the Techmaster blog on RF / microwave test instruments, acquisition strategy, and lab planning.
ISO/IEC 17025 Cal at Shipment
Every instrument ships with a current ISO/IEC 17025 accredited calibration certificate (ANAB Cert AC-1736) and a 30-day satisfaction window. New units include full OEM warranty.
30-Day Trade-In Window
Apply trade-in credit on Keysight, R&S, Anritsu, and Tektronix gear toward a new or refurbished purchase — or roll long-term rental fees into a final acquisition (rent-to-own).
Same-Week Lead Times
In-stock units ship within 1–2 business days. Rental dispatch within the same week. Free local pickup and delivery in Silicon Valley, Southern California, and Orlando.
Need a Fluke 5790A, Mensor deadweight, or unusual reference source not in stock? Talk with our calibrator sales team.
Our calibrator specialists handle Fluke Calibration factory-direct orders, OEM-discontinued multi-product calibrators from vault inventory, deadweight pressure machine retrofits, and short-notice rental of documenting calibrators for plant-shutdown cycles. Send us your source-and-measure spec for a same-day quote.
Frequently Asked Questions
Common questions about calibrator sales and rentals at Techmaster Electronics.
What brands of calibrator equipment does Techmaster sell?
We are an authorized partner for Fluke Calibration and an inventory reseller for Druck (Baker Hughes), Mensor (WIKA), Beamex, GE-Druck, JOFRA, Hart Scientific, Crystal Engineering, Ralston Instruments, and Time Electronics.
Can I rent calibrators for a short-term project or audit?
Yes. Rentals run daily, weekly, monthly, or quarterly — perfect for ISO 9001 / AS9100 surveillance audits, plant-shutdown loop checks, or seasonal field cal campaigns. Same-week dispatch from our Vista CA and Santa Clara CA warehouses.
Is the equipment calibrated before it ships?
Yes. Every calibrator ships with a current ISO/IEC 17025 accredited certificate (ANAB Cert AC-1736), uncertainties, and NIST traceability — so your cal lab is audit-ready the day it arrives.
Do you offer trade-in credit for old calibrators?
Yes. We accept Fluke 5500/5520/5700/5720, Druck DPI series, and HART Scientific dry-blocks for trade-in credit against new or refurbished purchases. Send us model + serial + condition for a same-day market quote.
What is the typical lead time for in-stock calibrators?
In-stock units ship within 1–2 business days. Rental dispatch within the same week. New Fluke Calibration units follow factory lead times (typically 4–10 weeks depending on configuration).
From which Techmaster locations do you ship calibrators?
Calibrator sales and rental inventory ships from Vista CA (HQ), Santa Clara CA, Orlando FL, and San Antonio TX, with regional pickup available in Southern California, Silicon Valley, and Central Florida.
Ready to buy or rent calibrators?
Send us your model list, configuration requirements, and target ship-date (or rental window) and we’ll respond within one business day with availability, pricing, and a quote ready for PO.
Related Articles
More from the Techmaster blog on RF / microwave test instruments, acquisition strategy, and lab planning.
RF & Wireless
RF Power Meter Calibration: Optimize Wireless Performance
Wireless link budgets depend on accurate RF power readings — how calibrated test gear safeguards transmit power and EVM.Read article →
