Note on particle counters: This page is for general information only. Techmaster does not calibrate particle counters of any make or model, and particle counters are not on our ANAB ISO/IEC 17025 scope (certificate AC-1736). Techmaster only performs calibration services that are covered by our scope. For particle counter calibration, please contact your instrument’s manufacturer or its authorized service provider, and follow any service requirements they specify. If you prefer, send us your request and, with your permission, we will forward it to the manufacturer. See what is on our accredited scope.
Silicon Valley Calibration Lab in Santa Clara, CA
Santa Clara, CA 95050
What is this lab accredited for?
Everything below is on Techmaster’s ANAB ISO/IEC 17025 scope (certificate AC-1736) at this laboratory. Exact ranges and uncertainties are on our published accreditation scope.
| Discipline | Accredited here |
|---|---|
| Vibration | 0.2 to 36 g pk, 1 Hz to 10 kHz; only at Santa Clara |
| 1-D and 2-D dimensional | Including 2-D non-contact vision, surface plates, thread plug and ring gages; only at Santa Clara |
| Force and volumetric | Force to 100,000 lbf; volumetric 1 to 220 mL; only at Santa Clara |
| Environmental chambers | Temperature and humidity chambers (Santa Clara and Orlando) |
| RF and microwave | Power sensor cal factors and SSB phase noise to 50 GHz, noise figure to 26.5 GHz |
| Oscilloscopes | Leveled sine to 2.1 GHz |
| Torque | Torque tools on the accredited scope |
| DC and low-frequency electrical | DC voltage to 1.1 kV, current to 1,000 A via shunts, clamp-on current to 1,025 A |
Pipette and gauss meter calibration are accredited at our Vista lab, and high voltage above the electrical range is handled at Vista (100 kV) or San Antonio (150 kV). Particle counters are not on the ANAB scope at any Techmaster lab, and Techmaster does not calibrate them. Patient simulators and optical radiometers are not on the ANAB scope at any Techmaster lab either; they receive NIST-traceable certificates, not ISO/IEC 17025 accredited ones.
How do I send instruments to this location?
Free local pickup and delivery is available across Silicon Valley, so instruments do not need to be packed or shipped. Ask about on-site calibration for surface plates and chambers that stay in place. Send a model list or photos of asset tags with your quote request so the work is scheduled before the equipment arrives.
For statewide coverage, see Calibration services in California.
Frequently asked questions
Where is Techmaster's Silicon Valley calibration lab?
What are the Santa Clara lab's hours?
What is accredited only at the Santa Clara lab?
Do you offer pickup in the Bay Area?
Other Techmaster locations
See all calibration lab locations and our accredited calibration services.