Note on particle counters: This page is for general information only. Techmaster does not calibrate particle counters of any make or model, and particle counters are not on our ANAB ISO/IEC 17025 scope (certificate AC-1736). Techmaster only performs calibration services that are covered by our scope. For particle counter calibration, please contact your instrument’s manufacturer or its authorized service provider, and follow any service requirements they specify. If you prefer, send us your request and, with your permission, we will forward it to the manufacturer. See what is on our accredited scope.
San Diego Calibration Lab in Vista, CA
Vista, CA 92081
What is this lab accredited for?
Everything below is on Techmaster’s ANAB ISO/IEC 17025 scope (certificate AC-1736) at this laboratory. Exact ranges and uncertainties are on our published accreditation scope.
| Discipline | Accredited here |
|---|---|
| RF and microwave | Power sensor cal factors and SSB phase noise to 50 GHz, noise figure to 26.5 GHz |
| Oscilloscopes | Leveled sine to 2.1 GHz |
| High voltage | DC and AC to 100 kV |
| Pipettes and gauss meters | Accredited only at Vista among Techmaster labs |
| Torque | Torque tools on the accredited scope |
| DC and low-frequency electrical | DC voltage to 1.1 kV, current to 1,000 A via shunts, clamp-on current to 1,025 A |
| Pressure | −12 psi to 10,000 psi, barometric to 39 psia |
Environmental chambers, vibration, 1-D/2-D dimensional and force calibration are accredited at our Santa Clara lab, not in Vista. Vista measures temperature and humidity but does not calibrate chambers. Particle counters are not on the ANAB scope at any Techmaster lab, and Techmaster does not calibrate them. Patient simulators and optical radiometers are not on the ANAB scope at any Techmaster lab either; they receive NIST-traceable certificates, not ISO/IEC 17025 accredited ones.
How do I send instruments to this location?
Free local pickup and delivery is available across Southern California, and local customers can also drop instruments off at the Vista lab during business hours. Send a model list or photos of asset tags with your quote request so the work is scheduled before the equipment arrives.
For statewide coverage, see Calibration services in California.
Frequently asked questions
Where is Techmaster's San Diego calibration lab?
What are the Vista lab's hours?
What is accredited only at the Vista lab?
Do you offer pickup in San Diego County?
Other Techmaster locations
See all calibration lab locations and our accredited calibration services.