Author Archives: Khanh Nguyen
Environmental Chamber Calibration, Mapping & Repair
Environmental chamber calibration, 9-point mapping and repair — on-site across the US. Chambers that won’t...
LISN Calibration: Impedance, VDF and Your Conducted Emissions Margin
What a LISN calibration checks under CISPR 16-1-2 (impedance, voltage division factor, isolation) and how...
Gas Flow Analyzer Calibration: Every Channel, Not Just Flow
TL;DR: A gas flow analyzer is five instruments in one box, flow, airway pressure, oxygen,...
Limited Calibration: When Is Calibrating Only Some Ranges Acceptable?
A limited calibration verifies only the functions, ranges or channels you use. Learn when ISO/IEC...
Load Bank Calibration: When the Readback Becomes Evidence
TL;DR: A load bank becomes a measuring instrument the moment its readback appears on an...
Pressure Scanner Calibration: Every Channel Is Its Own Measurement
TL;DR: Pressure scanner calibration treats a multi-channel scanning module as what it is: sixteen or...
Pressure Transducer Repair: What Can Be Fixed and What Means Replacement
TL;DR: Pressure transducer repair covers the parts outside the sensing element, cables and connectors, moisture...
Noise Figure Analyzer Calibration: The Chain Is the Instrument
TL;DR: Noise figure analyzer calibration verifies the whole measurement chain, not just a box: noise...
Oscilloscope Bandwidth Verification and Rise Time: How Are They Checked During Calibration?
How calibration labs verify oscilloscope -3 dB bandwidth with a leveled sine, how rise time...
Signal Generator Phase Noise: How Is It Verified, and What Should Your Calibration Certificate Show?
How signal generator phase noise (SSB L(f), dBc/Hz) is verified during calibration, why the test...
