Author Archives: Khanh Nguyen

Transformer Turns Ratio Tester Calibration: Ratio Is One of Six Parameters
November 11, 2026 | CALIBRATION

TL;DR: A transformer turns ratio tester calibration verifies more than ratio: ratio accuracy across the...

Torque Wrench Rental: Size the Range, Not the Maximum
November 10, 2026 | CALIBRATION

TL;DR: A torque wrench rental is a measuring instrument on somebody else’s asset register, and...

Surge Generator Calibration: What the Certificate Must Show
November 10, 2026 | CALIBRATION

TL;DR: A surge generator is defined entirely by the shape of what it produces. Its...

HEPA Filter Integrity Test: Photometer Scan and 0.01% Leak Limit
November 9, 2026 | Blog

How an installed HEPA filter integrity test works: PAO or DEHS challenge, photometer scan technique,...

Accelerometer Repair: The Shift Nobody Sees
November 9, 2026 | CALIBRATION

TL;DR: A dropped accelerometer rarely dies, it shifts. Sensitivity moves a few percent, the mounted...

Overdue Calibration: Can You Use Past-Due Equipment?
November 8, 2026 | Blog

An instrument past its calibration due date has no valid status. Learn when a grace...

Height Gauge Repair: Six Faults That Move Microns
November 8, 2026 | CALIBRATION

TL;DR: A height gauge fails by microns, not by dying. Scale contamination, a worn probe...

Torque Analyzer Calibration: What Gets Verified
November 7, 2026 | CALIBRATION

TL;DR: A torque analyzer is the reference every wrench in the plant is judged against,...

Digital Multimeter Rental: What to Specify
November 6, 2026 | CALIBRATION

TL;DR: Digit count is the number everyone quotes and the one least likely to decide...

How Often Calibrate Reference Voltage Standard?
November 6, 2026 | Blog

Reference Voltage Standard FAQ: Calibration Intervals, Accuracy & Compliance In electrical testing and calibration, a...

Request a Quote