Note on particle counters: This page is for general information only. Techmaster does not calibrate particle counters of any make or model, and particle counters are not on our ANAB ISO/IEC 17025 scope (certificate AC-1736). Techmaster only performs calibration services that are covered by our scope. For particle counter calibration, please contact your instrument’s manufacturer or its authorized service provider, and follow any service requirements they specify. If you prefer, send us your request and, with your permission, we will forward it to the manufacturer. See what is on our accredited scope.
Orlando Calibration Lab
Orlando, FL 32807
What is this lab accredited for?
Everything below is on Techmaster’s ANAB ISO/IEC 17025 scope (certificate AC-1736) at this laboratory. Exact ranges and uncertainties are on our published accreditation scope.
| Discipline | Accredited here |
|---|---|
| RF and microwave | Power sensor cal factors and SSB phase noise to 50 GHz, noise figure to 26.5 GHz |
| Environmental chambers | Temperature and humidity chambers (Orlando and Santa Clara only) |
| High current | AC high current to 1,500 A (Orlando and San Antonio); clamp-on to 1,025 A |
| Oscilloscopes | Leveled sine to 2.1 GHz |
| Torque | Torque tools on the accredited scope |
| DC and low-frequency electrical | DC voltage to 1.1 kV, current to 1,000 A via shunts |
| Pressure | −12 psi to 10,000 psi, barometric to 39 psia |
Vibration, 1-D/2-D dimensional and force are accredited at Santa Clara; pipettes, gauss meters and 100 kV high voltage at Vista. Particle counters are not on the ANAB scope at any Techmaster lab, and Techmaster does not calibrate them. Patient simulators and optical radiometers are not on the ANAB scope at any Techmaster lab either; they receive NIST-traceable certificates, not ISO/IEC 17025 accredited ones.
How do I send instruments to this location?
Free local pickup and delivery is available in the Orlando area. Customers elsewhere in Florida ship instruments to the lab; ask us about on-site calibration. Send a model list or photos of asset tags with your quote request so the work is scheduled before the equipment arrives.
For statewide coverage, see Calibration services in Florida.
Frequently asked questions
Where is Techmaster's Orlando calibration lab?
What are the Orlando lab's hours?
Is the Orlando lab ISO/IEC 17025 accredited?
Do you offer pickup in Orlando?
Other Techmaster locations
See all calibration lab locations and our accredited calibration services.