Author Archives: Khanh Nguyen

How to Use an Ultrasonic Flaw Detector?
August 12, 2026 | NDT

How to Use an Ultrasonic Flaw Detector: Setup, Operation & Best Practices For Non-Destructive Testing...

Renting vs Buying a Handheld Particle Counter: What’s Best?
August 10, 2026 | Environmental / Particle / Air

Rent vs Buy Handheld Particle Counter: What Makes Sense for Your Lab? Note on particle...

Ultrasonic Flaw Detector Calibration: Step-by-Step Guide
August 10, 2026 | NDT

Ultrasonic Flaw Detector Calibration: Step-by-Step Guide For Non-Destructive Testing (NDT) professionals, quality managers, and field...

How Often Should You Calibrate a Handheld Particle Counter?
August 10, 2026 | Environmental / Particle / Air

How Often Should You Calibrate a Handheld Particle Counter? Note on particle counters: This page...

USP <41> Minimum Weight: How to Calculate It on an Analytical Balance
August 10, 2026 | Blog

USP minimum weight is calculated, not specified: 2s divided by 0.001 from a 10-weighing repeatability...

Does a GPS-Disciplined Oscillator Need Calibration? GPS Lock vs ISO/IEC 17025 Traceability
August 9, 2026 | Blog

GPS lock makes a GPSDO accurate, but not traceable. What ISO/IEC 17025 assessors require: the...

Dry-Block vs Liquid Bath: Which Temperature Calibrator Meets Your Uncertainty Target?
August 8, 2026 | Blog

Axial inhomogeneity inside the block, not the display, dominates dry-block uncertainty. A worked EURAMET cg-13...

How to Calibrate a Handheld Particle Counter: ISO 17025 Guide
August 6, 2026 | Environmental / Particle / Air

How to Calibrate a Handheld Particle Counter: ISO/IEC 17025 Step-by-Step Airborne particles can easily ruin...

pH Meter Calibration: What Slope and Offset Values Actually Pass
August 6, 2026 | Blog

A pH meter calibration passes when the electrode slope falls within roughly 95-102% of the...

Keysight vs Rohde & Schwarz DC Power Supply
August 5, 2026 | Electrical / General T&M

Keysight vs Rohde & Schwarz DC Power Supply: Which Brand Is Better? Lab managers and...

Request a Quote