Blog
How to Set Up a Calibration Program from Scratch (6 Steps)
TL;DR: Six steps, in order: inventory every instrument, classify by criticality, set intervals with a...
Does Used or Rented Test Equipment Need Calibration?
TL;DR: A certificate that arrives in the box documents the seller’s process, not yours, it...
How to Use a Curve Tracer Analyzer?
How to Use a Curve Tracer Analyzer: Setup, Operation & Best Practices Understanding how to...
How to Choose a Digital Caliper: Buying Guide & Tips
How to Choose a Digital Caliper: A Complete Buying Guide for Your Facility When you...
Where to Get a Handheld Particle Counter Calibrated in the US
Short answer: Techmaster Electronics does not calibrate handheld or airborne particle counters of any make...
How to Calibrate a Digital Caliper: ISO/IEC 17025 Step-by-Step
How to Calibrate a Digital Caliper: ISO/IEC 17025 Step-by-Step In modern manufacturing, a fraction of...
Hardness Tester Repair: Indenter, Force or Test Block?
TL;DR: Most hardness tester repair comes down to a chipped or worn indenter, test force...
EMC Test Equipment Calibration: What Must Be Calibrated and Why
TL;DR: An EMC test report is only as traceable as the instruments behind it. Six...
Multifunction Calibrator Rental: What Has to Be in the Case
TL;DR: A multifunction calibrator rental gives you a 5522A-class reference for a week, a month,...
RF Power Meter and Sensor Calibration Guide
TL;DR: Power meter and sensor calibration verifies calibration factors across frequency, linearity across the power...