ISO/IEC 17025:2017 accredited calibration, factory-trained repair, and new / pre-owned / rental test equipment for 12 regulated industries — from aerospace and semiconductor to pharma, automotive, energy, and healthcare. ANAB Certificate AC-1736.
Techmaster Electronics has provided ISO/IEC 17025 accredited calibration, factory-trained repair, and authorized-partner equipment sales and rentals since 1989. Our 5 US laboratories serve customers under AS9100, IATF 16949, ISO 13485, FDA QSR, GMP, SEMI, NERC-CIP, USDA-FSIS, and API-MPMS programs — with NIST-traceable certificates on every shipment.
Industries & Verticals We Serve
Click any industry for the calibration, repair, and equipment sales / rental services Techmaster delivers to that vertical — plus the regulatory standards we ship-ready certify to.
If your vertical isn’t on the grid above, we likely still cover the instruments and standards you need. Defense, nuclear, mining, construction, water treatment, environmental, nanotech, dental, EMS, veterinary, hazmat — reach out and we’ll route you to the right discipline lead.
Why aerospace, semiconductor, automotive, pharma, medical-device, energy, and oil-and-gas teams have trusted Techmaster Electronics for ISO/IEC 17025 calibration since 1989.
✓
ISO/IEC 17025:2017 Accredited
ANAB Certificate AC-1736 — full uncertainty budgets, NIST-traceable standards, and audit-ready documentation across every discipline.
🇺🇸
5 ANAB-Accredited US Labs
Vista CA, Santa Clara CA, Orlando FL, San Antonio TX, and Holly Springs NC — plus a corporate office in Henderson NV. National coverage, same-week scheduling.
📅
35+ Years of Metrology Expertise
Calibrating mission-critical test equipment since 1989 — institutional knowledge across all 12 disciplines from RF to mass / mechanical to chemistry.
🚚
On-Site Calibration Nationwide
Engineers travel CONUS for cleanroom certification, CMM verification, autoclave mapping, crane proof-loading, and torque-tooling fleet surveys.
🔐
24/7 Online Certificate Portal
Secure customer portal for instant access to certificates, traceability records, and historical reports — ready for AS9100, IATF, ISO 13485, and FDA QSR audits.
⚡
Fast Turnaround & Free Pickup
5-business-day standard turnaround with 1–2 day expedite available. Free local pickup and delivery in Silicon Valley, Southern California, and Orlando.
Frequently Asked Questions
Common questions about Techmaster’s industry-specific calibration, repair, and equipment services.
Which industry standards is Techmaster’s calibration accredited to support?
Our ANAB-accredited ISO/IEC 17025:2017 cal certificates (AC-1736) are routinely accepted in AS9100, AS9102 first-article, IATF 16949, ISO 13485, FDA 21 CFR Part 820 (QSR), cGMP / GMP Annex 1, SEMI F-series, NERC-CIP, USDA-FSIS, NTEP / Handbook 44, IEC 60601 medical electrical safety, AMS 2750 pyrometry, and API-MPMS custody-transfer audits.
Do you support pharma cleanroom and cold-chain validation?
Yes. We perform ISO 14644-1/2/3 cleanroom certification, HEPA leak testing, USP <797> / <800> compounding pharmacy qualification, on-site pharma temperature mapping per USP <1079>, autoclave thermocouple mapping per ISO 17665, and pH / conductivity calibration for pharma-water USP standards.
Are you an authorized partner for Keysight, Fluke, or other OEMs?
Yes. We are an authorized partner for Keysight Technologies, Fluke (Calibration and Biomedical), and Rohde & Schwarz, plus an inventory reseller for Tektronix, Anritsu, Boonton, Mettler-Toledo, Sartorius, PCB Piezotronics, Brüel & Kjær, Espec, Thermotron, Zeiss, Hexagon, and many others.
Can you support multiple industries from one purchase order?
Yes. Many of our customers mix calibration / repair / sales / rental across disciplines — a single PO can combine RF spectrum analyzer cal, dimensional CMM verification, IEC 60601 medical-safety analyzer purchase, and emergency rental of an EMC receiver. We consolidate billing and traceability under one account.
Where do you serve customers from?
Techmaster Electronics operates five ISO/IEC 17025 accredited US laboratories: Vista CA (Corporate HQ), Santa Clara CA (Silicon Valley), Orlando FL, San Antonio TX, and Holly Springs NC. Corporate office in Henderson NV. Free local pickup in Silicon Valley, Southern California, and Orlando; nationwide shipping and on-site service across the continental US.
Ready to discuss your industry’s calibration needs?
Send us your instrument list, target standards, and audit cadence and we’ll respond within one business day with a proposal scoped to your industry’s compliance requirements.
