Aerospace and Defense Test Equipment Calibration — ISO/IEC 17025 accredited, ANAB AC-1736

Aerospace & Defense

ISO/IEC 17025:2017 accredited calibration, factory-trained repair, and sales / rentals of RF, electrical, dimensional, EMC, and environmental test equipment for AS9100, AS9102, MIL-STD-810, RTCA DO-160, and ITAR programs · ANAB Certificate AC-1736

Contact UsRequest a Quote

Aerospace & Defense Test Equipment Services

Techmaster Electronics has supported aerospace primes, defense contractors, and Tier-1 / Tier-2 sub-suppliers since 1989. From jet-engine ATP and avionics MIL-STD-461 EMC qualification to AS9102 first-article dimensional inspection and propulsion-fluid pressure custody-transfer, our 5 US laboratories deliver NIST-traceable calibration, factory-trained repair, and authorized-partner equipment under one ANAB-accredited umbrella.

Calibration for Aerospace & Defense

Top calibration disciplines for aerospace and defense customers — all under ANAB Cert AC-1736.

📡RF / MicrowaveSpectrum analyzers, VNAs, signal generators for radar, EW, avionics, and satcom — DC – 110 GHz.See RF cal →📶EMC / EMIMIL-STD-461, DO-160, and CISPR-compliant EMI receivers, LISNs, antennas, ESD / EFT / surge generators.See EMC cal →📏DimensionalAS9102 first-article, CMM volumetric verification, jet-engine blade tolerances, GD&T metrology.See dimensional cal →📳Vibration & EnvironmentalMIL-STD-810 random and sine-vibration controllers, accelerometers, and environmental chambers.See vibration cal →

Repair for Aerospace & Defense

Factory-trained repair for the test instruments that drive AS9100 product release.

🔧RF / Microwave RepairComponent-level repair of legacy HP / Agilent / Keysight / R&S RF gear — including OEM-discontinued models.See RF repair →⚙️EMC / EMI RepairEMI receiver, LISN, antenna, and ESD-gun repair with post-repair MIL-STD verification.See EMC repair →🛠️Vibration RepairLDS / B&K shaker amp, controller, and accelerometer repair with traceable post-repair calibration.See vibration repair →

Sales & Rentals for Aerospace & Defense

Authorized partner sales and project rentals for aerospace test programs.

🛒RF / Microwave SalesNew and pre-owned Keysight PXA / R&S FSW for radar, EW, and satcom test labs.Shop RF gear →📦EMC / EMI SalesCISPR-compliant receivers, antennas, GTEM cells, and ESD / EFT generators — new and rental.Shop EMC gear →🚚Environmental ChambersEspec, Thermotron, and Tenney MIL-STD-810 thermal-shock and humidity chambers.Shop chambers →

Compliance & Industry Standards

Techmaster ANAB-accredited cal certificates and ITAR-controlled processes satisfy the audit requirements of every major aerospace and defense quality standard:

AS9100D aerospace quality management · AS9102 first-article inspection · NADCAP for non-destructive test · MIL-STD-461G EMI emissions and susceptibility · MIL-STD-810H environmental engineering · RTCA DO-160G airborne equipment environmental conditions · MIL-STD-883 microcircuit test · MIL-STD-130N unique identifier (IUID) · DFARS / ITAR US-citizen technician access controls · DCMA / DCAA traceability · FAA AC 21-26 production approval · SAE AS9117 delegated product release verification

UUTs We Calibrate

Comprehensive list of Unit-Under-Test (UUT) instruments customers in this industry typically send to Techmaster for ISO/IEC 17025 accredited calibration. Click any linked item for a deep-dive article on its calibration procedure, uncertainty budget, and typical failure modes.

RF & Microwave UUT

EMC / EMI UUT

  • EMI Receiver
  • LISN
  • RF Antenna
  • BCI Probe
  • EFT Generator
  • ESD Simulator
  • Surge Generator
  • Dip Generator
  • GTEM Cell
  • TEM Cell
  • Electric Field Probe
  • Magnetic Field Probe
  • Bulk Current Injection Probe
  • Coupling-Decoupling Network
  • EMC Test Antenna
  • Field Strength Meter
  • Electrostatic Field Meter

Dimensional UUT

Environmental & Vibration UUT

Electrical & Power UUT

Need ITAR-controlled handling, on-site ATP support, or AS9102 first-article packages?

Our aerospace specialists handle ITAR-controlled instrument intake, on-site calibration at SCIF facilities, complete AS9102 first-article documentation packages, and short-notice rental of high-end RF / EMC gear for prime / sub-tier production audits.

Request a QuoteCall +1 866-779-5695

Frequently Asked Questions

Common questions about Techmaster aerospace and defense test equipment services.

Does Techmaster comply with ITAR for defense customers?
Yes. Our US-staffed laboratories operate under ITAR-controlled procedures: US-citizen-only technician handling for ITAR-flagged instruments, secure intake, and chain-of-custody documentation. Defense customers can specify ITAR routing on the PO; we maintain segregated work-cells where required.
Are your calibration certificates accepted by aerospace primes (Boeing, Lockheed, NG, RTX)?
Yes. Our ANAB-accredited ISO/IEC 17025:2017 cal certificates (AC-1736) are accepted at Boeing, Lockheed Martin, Northrop Grumman, Raytheon Technologies, GE Aerospace, Pratt & Whitney, L3Harris, BAE Systems, and SpaceX supplier networks.
Can you support AS9102 first-article inspection (FAI)?
Yes. Our dimensional metrologists deliver complete AS9102 Rev C / D packages: Form 1 (Part Number Accountability), Form 2 (Material / Process), and Form 3 (Characteristic Accountability) with traceable measurement data, full uncertainty budgets, and GD&T-aligned CMM reports.
Do you perform on-site calibration at military or SCIF facilities?
Yes. Our engineers travel CONUS for on-site calibration at military bases, depots, and SCIF-rated facilities. Cleared escort and prior-approved instrument lists supported. We coordinate intake with your security and program-management teams.
Which Techmaster locations serve aerospace customers?
All five US laboratories serve aerospace: Vista CA (HQ, Southern California aerospace cluster), Santa Clara CA (Silicon Valley defense electronics), Orlando FL (East Coast aerospace / FL Space Coast), San Antonio TX (military depot proximity), and Holly Springs NC (Mid-Atlantic / RTP defense corridor).

Ready for an aerospace / defense calibration proposal?

Send us your instrument list, target standards (AS9100 / MIL-STD / DO-160), and audit cadence. We will respond within one business day with a scope proposal aligned to your program requirements.

Get a Quotesales@techmaster.us