Energy Power and Utilities Test Equipment Calibration — NERC CIP IEEE

Energy, Power & Utilities

ISO/IEC 17025:2017 accredited calibration, repair, and sales / rentals of substation, transformer, turbine, and renewable-energy test equipment for NERC-CIP, IEEE, and IEC 61850 programs · ANAB Certificate AC-1736

Contact UsRequest a Quote

Energy, Power & Utilities Services

Techmaster Electronics serves electric utilities, ISOs / RTOs, IPPs, wind / solar / hydro developers, gas-turbine OEMs, nuclear-grade contractors, and battery-energy-storage (BESS) integrators. From transformer-ratio meters and partial-discharge analyzers to PTP IEEE 1588 synchrophasor references for substation IEC 61850 systems, our 5 US labs deliver NERC-CIP traceable measurement.

Calibration for Energy & Power

Top calibration disciplines for utility, IPP, and renewable-energy customers under NERC-CIP.

⚡ElectricalHigh-voltage insulation testers, transformer-ratio meters, partial-discharge analyzers.See electrical cal →🌡️ThermodynamicBoiler-exhaust thermocouples, turbine bearing RTDs, transformer oil-temperature gauges.See thermal cal →⏱️Time & FrequencyIEEE C37.118 PMU synchrophasor references and IEC 61850-9-3 PTP for substations.See time cal →⚖️Mass & MechanicalSkidmore-Wilhelm bolt-tension cal, gas-turbine blade torque, nuclear-grade fastener.See mass cal →

Repair for Energy & Power

Factory-trained repair for substation, transformer, and turbine test instruments.

🔧Electrical RepairHigh-voltage tester, megohmmeter, and substation-relay test set repair.See electrical repair →⚙️EMC / EMI RepairIEC 61000-4 surge / EFT generators and harmonic analyzers for substations.See EMC repair →

Sales & Rentals for Energy & Power

Authorized partner sales and project rentals for energy and utility customers.

🛒Electrical SalesYokogawa WT5000 power analyzers, Megger / AVO hipot testers, transformer test sets.Shop electrical gear →📦Time & Frequency SalesMicrosemi PMU references, GPS-DO synchronization for IEC 61850 substations.Shop time gear →🚚Mass & MechanicalSkidmore-Wilhelm bolt-tension calibrators for wind-turbine flange and structural bolting.Shop bolt gear →

Compliance & Industry Standards

Techmaster cal certificates satisfy the audit requirements of every major energy / utility framework:

NERC CIP-002 through CIP-014 · IEEE C37.118 synchrophasors · IEEE 1547 distributed energy interconnection · IEEE 519 harmonics · IEC 61850 substation automation · IEC 61000-4 series immunity · UL 1741 inverters · UL 9540 ESS · API 670 machinery protection · ASME PTC performance test codes · ASME N509 nuclear · NFPA 70 / 70B / 70E electrical safety · FERC Form 1 reporting

UUTs We Calibrate

Comprehensive list of Unit-Under-Test (UUT) instruments customers in this industry typically send to Techmaster for ISO/IEC 17025 accredited calibration. Click any linked item for a deep-dive article on its calibration procedure, uncertainty budget, and typical failure modes.

High-Voltage & Transformer Test UUT

Power Quality & Metering UUT

Temperature & Thermal UUT

Mechanical & Bolt-Tensioning UUT

Process & Flow UUT

Time & Sync (Substation IEC 61850) UUT

Need NERC-CIP audit-ready calibration, PMU verification, or wind-turbine bolt-tension?

Our energy specialists handle NERC-CIP substation instrument calibration, IEEE C37.118 PMU verification, IEC 61850 PTP timing reference cal, wind-turbine Skidmore-Wilhelm bolt-tension cal, and gas-turbine blade-root torque traceability.

Request a QuoteCall +1 866-779-5695

Frequently Asked Questions

Common questions about Techmaster energy, power, and utility test equipment services.

Are your cal certs accepted on NERC-CIP audits?
Yes. Our ANAB-accredited ISO/IEC 17025 cal certs satisfy NERC-CIP-007 cyber-security and CIP-010 configuration management documentation requirements at investor-owned utilities, municipal utilities, ISOs / RTOs, and cooperative power providers.
Do you calibrate synchrophasor / PMU references per IEEE C37.118?
Yes. PMU and PDC test sets are calibrated against UTC(USNO)-traceable atomic clocks at our labs, with phase / frequency / amplitude accuracy verified per IEEE C37.118.1a / 118.2.
Can you support wind-turbine flange bolting and tower fastener torque?
Yes. We calibrate and rent Skidmore-Wilhelm bolt-tension calibrators, torque multipliers, and tower-flange hydraulic tensioner load cells — per ASME B30 and turbine OEM specs.
Do you support nuclear-grade calibration?
We support ASME N509 / N510 and ANS-grade fastener and pressure-instrument calibration. We are not currently 10 CFR 50 Appendix B accredited; for safety-related nuclear work, contact us to discuss scope.
Which Techmaster locations serve energy customers?
All five US labs serve energy / utility customers. On-site service throughout the continental US for substation, wind-farm, and gas-turbine field calibration.

Ready for an energy / utility calibration proposal?

Send us your instrument list, target NERC / IEEE / IEC standards, and outage cadence. We will respond within one business day with a scope proposal.

Get a Quotesales@techmaster.us