Telecom Wireless and IoT Test Equipment Calibration — 5G FCC ETSI 3GPP

Telecom, Wireless & IoT

ISO/IEC 17025:2017 accredited calibration, repair, and sales / rentals of RF / microwave, time-and-frequency, and EMC test equipment for 5G / Wi-Fi 6E/7 / satellite / IoT certification labs · ANAB Certificate AC-1736

Contact UsRequest a Quote

Telecom, Wireless & IoT Test Equipment Services

Techmaster Electronics serves cellular carriers, satellite operators, fiber backhaul providers, IoT module OEMs, Wi-Fi / Bluetooth / Zigbee / LoRa certification labs, and 5G fronthaul installers. From mmWave VNA calibration through 110 GHz and PTP IEEE 1588 grandmaster clocks to FCC Part 15 / ETSI EN 300-series compliance and over-the-air (OTA) chamber qualification, our 5 US labs deliver carrier-grade traceability.

Calibration for Telecom & Wireless

Top calibration disciplines for telecom, wireless, and IoT customers.

📡RF / MicrowaveSpectrum analyzers, VNAs, signal gens, power meters for 5G FR1 / FR2, Wi-Fi 6E/7, satellite.See RF cal →⏱️Time & FrequencyPTP IEEE 1588 grandmasters, GPS-DO references, atomic clocks, phase-noise analyzers.See time cal →📶EMC / EMIFCC Part 15 / ETSI EN 300-series EMI receivers, antennas, GTEM cells for OEM compliance.See EMC cal →⚡ElectricalBattery / PoE power test, base-station DC plant analyzers, harmonic analyzers.See electrical cal →

Repair for Telecom & Wireless

Factory-trained repair for the RF and EMC instruments behind 5G / Wi-Fi / IoT certification.

🔧RF / Microwave RepairSpectrum / network / signal-gen repair for 5G NR, satellite, and carrier-acceptance gear.See RF repair →⚙️EMC / EMI RepairCISPR / FCC EMI receiver, antenna, ESD-gun repair with re-accreditation.See EMC repair →

Sales & Rentals for Telecom & Wireless

Authorized partner sales and project rentals for telecom and wireless engineering teams.

🛒RF / Microwave SalesKeysight FieldFox, R&S FSV / FSW handheld and benchtop for cell-site acceptance.Shop RF gear →📦Time & Frequency SalesMicrosemi GPS-DO references, PTP grandmasters, atomic clocks for data-center sync.Shop time gear →🚚EMC / EMI SalesCISPR-compliant EMI receivers, antennas, GTEM cells — new and project rental.Shop EMC gear →

Compliance & Industry Standards

Techmaster cal certificates satisfy the audit requirements of every major telecom / wireless framework:

FCC Part 15 unlicensed devices · FCC Part 22 / 24 / 27 / 90 licensed radio · ETSI EN 300 / 301 / 302 series · 3GPP TS 36 / 38 / 51 series · IEEE 802.11 a/b/g/n/ac/ax/be Wi-Fi · IEEE 1588 PTP · ITU-T G.8275 telecom timing · O-RAN fronthaul · CISPR 32 / 35 multimedia EMC · RED 2014/53/EU · NEBS GR-1089 central office EMC

UUTs We Calibrate

Comprehensive list of Unit-Under-Test (UUT) instruments customers in this industry typically send to Techmaster for ISO/IEC 17025 accredited calibration. Click any linked item for a deep-dive article on its calibration procedure, uncertainty budget, and typical failure modes.

RF / Microwave (5G / 6G / Wi-Fi) UUT

Time & Frequency UUT

EMC / EMI (FCC, CISPR) UUT

Electrical / Power (Cell-Site, Data Center) UUT

Site Survey & Cable UUT

Environmental & Site UUT

Need mmWave VNA cal, PTP grandmaster verification, or 5G site-acceptance test?

Our telecom specialists handle mmWave VNA calibration through 110 GHz for FR2, PTP IEEE 1588 grandmaster verification for PRTC-A telecom sync, FCC Part 15 / ETSI compliance pre-scans, and site-acceptance test for 5G fronthaul and Wi-Fi 6E/7 mesh.

Request a QuoteCall +1 866-779-5695

Frequently Asked Questions

Common questions about Techmaster telecom, wireless, and IoT test equipment services.

Can you calibrate 5G FR1 / FR2 test equipment?
Yes. Keysight UXM 5G, R&S CMW500 / CMP200, and Anritsu MT8000A 5G NR test sets calibrated with NIST-traceable mmWave references through 110 GHz at our Vista CA and Santa Clara CA labs.
Do you support PTP IEEE 1588 grandmaster calibration?
Yes. We calibrate Microsemi, Spectracom, Meinberg, and Trimble grandmaster clocks to PRTC-A / -B / G.8272 specifications — with UTC(USNO) / UTC(NIST) traceability.
Are your cal certs accepted on FCC / ETSI certification audits?
Yes. Our ANAB-accredited ISO/IEC 17025 cal certs are accepted at FCC TCBs, ETSI-recognized test labs, and 3GPP-approved certification bodies (CTIA Authorized Test Labs).
Can you support site-acceptance test for 5G cell-site rollouts?
Yes. We supply calibrated FieldFox handheld VNAs, R&S FSH spectrum analyzers, and Anritsu Site Master cable / antenna analyzers — new, refurbished, or short-term project rentals for carriers and tower companies.
Which Techmaster locations serve telecom customers?
Santa Clara CA (Silicon Valley wireless OEMs), Vista CA (Southern California telecom), Orlando FL (FL satellite uplink), and Holly Springs NC (Mid-Atlantic / RTP wireless cluster). On-site CONUS.

Ready for a telecom / wireless calibration proposal?

Send us your instrument list, target FCC / ETSI / 3GPP standards, and certification timeline. We will respond within one business day.

Get a Quotesales@techmaster.us