Test Labs and Metrology Cal Lab Outsource Equipment Sales

Test Labs & Metrology

ISO/IEC 17025:2017 accredited primary-standard calibration, cal-lab outsource overflow, and authorized-partner sales of metrology references, EMC test sets, and environmental chambers for cal labs, EMC labs, and environmental test houses · ANAB Certificate AC-1736

Contact UsRequest a Quote

Test Labs & Metrology Services

Techmaster Electronics serves third-party calibration laboratories, EMC compliance test houses, environmental test bureaus, university metrology programs, and corporate cal-lab outsource clients. From primary cesium-clock and Fluke 8588A reference DMM calibration to EMC accredited-lab antenna sets and environmental-chamber turnkey integration, our 5 US labs deliver lab-to-lab traceability and overflow capacity.

Calibration for Test Labs & Metrology

Top calibration disciplines for cal-lab outsource and metrology customers.

🎛️CalibratorsFluke 5790A / 8588A reference DMMs, Druck deadweight pressure standards, ITS-90 references.See calibrator cal →⏱️Time & FrequencyCesium clocks (Microsemi 5071A), hydrogen masers, Allan-variance analyzers — primary refs.See time cal →📡RF / MicrowavemmWave VNAs through 110 GHz, R&S / Keysight reference signal sources for cal-lab use.See RF cal →📏DimensionalGrade-AA gauge blocks, master squares, laser interferometers, surface-plate references.See dimensional cal →

Repair for Test Labs & Metrology

Factory-trained repair for the primary and transfer standards that cal labs depend on.

🔧Calibrator RepairFluke 5520A / 5700A / 8508A reference standard repair with full uncertainty re-verification.See calibrator repair →⚙️RF / Microwave RepairPNA / FieldFox / ESCI repair for accredited EMC and RF cal labs.See RF repair →🛠️Electrical RepairReference DMM, voltage divider, and JJA-based voltage standard refurbishment.See electrical repair →

Sales & Rentals for Test Labs & Metrology

Authorized partner sales and project rentals for third-party cal labs and EMC test houses.

🛒CalibratorsFluke 5520A / 5790A / 8588A reference DMMs, multi-product calibrators, deadweight testers.Shop calibrators →📦Time & FrequencyMicrosemi 5071A cesium clocks, hydrogen masers, GPS-DO references for cal-lab traceability.Shop time gear →🚚EMC / EnvironmentalReceivers, antennas, chambers — the lab-grade arsenal for accredited test houses.Shop test-lab gear →

Compliance & Industry Standards

Techmaster cal certificates satisfy the audit requirements of every major lab-accreditation framework:

ISO/IEC 17025:2017 testing and calibration laboratories · ISO/IEC 17020 inspection bodies · ANAB / A2LA accreditation requirements · NIST Handbook 150 NVLAP · NCSL International Z540.1 / Z540.3 / RP-1 · ILAC P14 uncertainty & conformance · ILAC G24 recalibration intervals · JCGM 100 / GUM measurement uncertainty · JCGM 200 / VIM vocabulary · EURAMET CG-series calibration guides · NCSLI RP-12 traceability · EA-4/02 uncertainty in calibration

UUTs We Calibrate

Comprehensive list of Unit-Under-Test (UUT) instruments customers in this industry typically send to Techmaster for ISO/IEC 17025 accredited calibration. Click any linked item for a deep-dive article on its calibration procedure, uncertainty budget, and typical failure modes.

Electrical Reference UUT

RF / Microwave Reference UUT

EMC / EMI Reference UUT

Dimensional Reference UUT

Mass, Force, Torque & Hardness Reference UUT

Temperature, Humidity & Pressure Reference UUT

Chemistry & Process Reference UUT

Time & Sound Reference UUT

Need cal-lab overflow capacity, primary-standard cal, or full accredited test-lab build?

Our metrology specialists handle cal-lab overflow contracts (we calibrate the standards that calibrate your customers), primary cesium clock and reference DMM calibration with ANAB-traceable certs, EMC test-house accreditation prep, and full turnkey environmental chamber + shaker test-lab integration.

Request a QuoteCall +1 866-779-5695

Frequently Asked Questions

Common questions about Techmaster test-lab and metrology services.

Can you provide cal-lab overflow capacity?
Yes. Many accredited cal labs use Techmaster as overflow capacity during peak season, surveillance audits, or technician PTO. We provide turnkey shipping, ANAB-aligned reports, and traceability that drops directly into your accreditation scope.
Are your primary references traceable for cal-lab use?
Yes. Our primary references include cesium-clock UTC(USNO), Fluke 8588A reference DMMs, deadweight pressure machines, NIST SRM-traceable resistance and voltage standards, and ITS-90 temperature fixed points.
Can you calibrate other ISO/IEC 17025 labs primary standards?
Yes. We are accustomed to lab-to-lab calibration of primary standards (cesium clocks, reference DMMs, deadweight testers) with the documentation depth needed for downstream accreditation scope.
Do you support new-lab build-outs and accreditation prep?
Yes. From specifying primary references and uncertainty budgets to gap analysis against ISO/IEC 17025 clauses to mock pre-assessment audits, our metrology team helps third-party labs achieve ANAB / A2LA accreditation faster.
Which Techmaster locations serve cal-lab and metrology customers?
All five US labs serve cal-lab and metrology customers. Vista CA and Santa Clara CA are our primary cal-lab outsource hubs.

Ready for a cal-lab overflow or primary-standard cal proposal?

Send us your reference list, accreditation scope, and turnaround targets. We will respond within one business day with a lab-to-lab proposal.

Get a Quotesales@techmaster.us