Precision Manufacturing CNC and Mold-Die Test Equipment Calibration

Precision Manufacturing & Mold-Die

ISO/IEC 17025:2017 accredited calibration, repair, and sales / rentals of CMMs, calipers, micrometers, surface plates, torque tooling, and force gauges for CNC machining, mold-die, and contract-mfg QC programs · ANAB Certificate AC-1736

Contact UsRequest a Quote

Precision Manufacturing & Mold-Die Services

Techmaster Electronics serves CNC machine shops, mold and die makers, contract manufacturers, injection-molders, stamping shops, hydraulic spool valve producers, and precision-fabrication operations. From AS9102 first-article CMM packages to tool-room first-off micrometer sets and production-line torque-tooling fleet calibration, our 5 US labs deliver ASME B89 / ISO 10360 dimensional traceability.

Calibration for Precision Mfg

Top calibration disciplines for precision-machining, mold-die, and contract manufacturing.

📏DimensionalCalipers, micrometers, gauge blocks, CMMs, surface plates, optical comparators per ASME B89.See dimensional cal →⚖️Mass & MechanicalTorque-tooling fleet, force gauges, load cells, hardness testers per ISO 6789 / ASTM E18.See mass cal →🎛️CalibratorsReference DMMs, multifunction calibrators for production-line tester verification.See calibrator cal →⚡ElectricalCNC servo-drive verification, electrical safety testing for machine-tool retrofits.See electrical cal →

Repair for Precision Mfg

Factory-trained repair for the dimensional, torque, and force instruments behind precision QC.

🔧Electrical RepairServo-drive, motor-controller, and machine-tool test equipment refurbishment.See electrical repair →⚙️Calibrator RepairFluke 5520A multi-product, documenting calibrator, and reference DMM repair.See calibrator repair →🛠️Vibration RepairTool-life vibration monitor and predictive-maintenance accelerometer repair.See vibration repair →

Sales & Rentals for Precision Mfg

Authorized partner sales and project rentals for contract-machining and mold-die shops.

🛒DimensionalZeiss / Hexagon / Mitutoyo CMMs, gauge sets, surface plates, Renishaw laser interferometers.Shop CMMs →📦Mass & MechanicalCDI / Snap-on torque wrenches, Mark-10 force gauges, Wilson hardness testers.Shop torque gear →🚚CalibratorsFluke 5520A / 5790A / 8588A multi-product calibrators for QC bench standards.Shop calibrators →

Compliance & Industry Standards

Techmaster cal certificates satisfy the audit requirements of every major precision-mfg framework:

ISO 9001:2015 · AS9100D aerospace · IATF 16949 automotive · ISO 13485 medical device · ASME B89 dimensional metrology · ASME B89.1.9 gauge blocks · ASME B89.4.10360.2 CMM · ISO 10360 CMM verification · ISO 3650 gauge blocks · ANSI / ASME Y14.5 GD&T · NADCAP AC7004 measurement & inspection · ISO 6789 torque wrench · ASME B107.300 torque tools · ASTM E74 force calibration · ASTM E18 hardness

UUTs We Calibrate

Comprehensive list of Unit-Under-Test (UUT) instruments customers in this industry typically send to Techmaster for ISO/IEC 17025 accredited calibration. Click any linked item for a deep-dive article on its calibration procedure, uncertainty budget, and typical failure modes.

Linear Dimensional UUT

Gauge Block, Pin, Thread & Plug UUT

CMM, Optical & Laser UUT

  • Optical Comparator
  • CMM
  • Surface Plate
  • Laser Interferometer
  • Master Square
  • Sine Bar

Surface, Coating & Finish UUT

Torque & Force (Production Line) UUT

Electrical / Machine-Tool UUT

Calibrators & References (Bench QC) UUT

Need AS9102 first-article, on-site CMM verification, or production-line torque-fleet?

Our precision-mfg specialists handle AS9102 first-article (FAI) dimensional packages, on-site CMM volumetric verification per ISO 10360-2 with grade-AA artifacts, large surface-plate flatness surveys, and production-line torque-tooling fleet certification with Cpk reports.

Request a QuoteCall +1 866-779-5695

Frequently Asked Questions

Common questions about Techmaster precision manufacturing and mold-die test equipment services.

Are your cal certs accepted on AS9100 / IATF / ISO 13485 supplier audits?
Yes. Our ANAB-accredited ISO/IEC 17025 cal certs are accepted on AS9100, IATF 16949, ISO 13485, and NADCAP supplier audits across aerospace, automotive, and medical-device customer networks.
Can you support AS9102 first-article inspection (FAI)?
Yes. We deliver complete AS9102 Rev C / D first-article packages with traceable CMM data and full uncertainty budgets — ideal for Tier-1 / Tier-2 aerospace contract manufacturers.
Do you support large-format surface-plate flatness surveys?
Yes. Our dimensional engineers perform on-site granite surface-plate flatness surveys (autocollimator / electronic level) up to 8 ft × 16 ft per Federal Spec GGG-P-463c.
Can you calibrate production-line torque tooling fleets?
Yes. Click-wrench fleets, electric DC-shutoff drivers, and pneumatic-nutrunner verification — per ISO 6789-2 and ASME B107.300, with Cpk reports for IATF 16949 process-capability studies.
Which Techmaster locations serve precision mfg customers?
All five US labs serve precision-mfg: Vista CA, Santa Clara CA, Orlando FL, San Antonio TX, and Holly Springs NC. On-site CONUS for CMM verification and torque-fleet campaigns.

Ready for a precision manufacturing calibration proposal?

Send us your part envelope, tolerances, AS9102 / IATF requirements, and audit cadence. We will respond within one business day with a scope proposal.

Get a Quotesales@techmaster.us